Hi,
Has anyone else experienced hiss from their System 8?
I purchased an ex-display Roland System 8 which emits an amount of hiss from the audio out connections, which I am surprised by as the outputs are balanced. I've made two noise floor tests for folk to listen to.
Test 1 - System 8 factory reset, powered on and the default patch played at full volume through a Focusrite ISA428 preamp set to line level into an Apogee AD16X converter.
Test 2 - The output of the ISA428 into the Apogee with nothing connected (for noise floor comparison).
I sent these files (and the description of the issue) to Product Support at Roland who didn't seem to think it was an issue.
I'd be grateful if anyone could let me know if their System 8 is a as noisy as mine!
Cheers,
Mat
Hiss from the outputs
Hiss from the outputs
- Attachments
-
- Roland System 8 test2.mp3
- (358.51 KiB) Downloaded 192 times
-
- Roland System 8 test.mp3
- (381.98 KiB) Downloaded 176 times
Re: Hiss from the outputs
HI
i can not hear something wrong from you mp3s.
Please check your input knob is at 0 (near S8 volume knob), as it introduces a faire amount of noise when high (even if there is nothing connected to inputs)
i can not hear something wrong from you mp3s.
Please check your input knob is at 0 (near S8 volume knob), as it introduces a faire amount of noise when high (even if there is nothing connected to inputs)
Re: Hiss from the outputs
That completely solved the problem! Thank you.
Re: Hiss from the outputs
great!