How to install Waveforms

[Synth Guru]

Hey everyone.

I know that the Integra sounds are on the Roland Axial site but can someone pls explain step by step how to get them installed into the JD-XA?

Thanks!

[RayS]

Synth GUru I made a post how to do this...anyway
See the manual page 7. Heres How.
You first format the USB stick in the JD-XA, then put the files(.SVD) you downloaded ..& want to import into the "Import" folder of the USB stick. Insert the stick in the JD-XA, Hold the SHift and hit Copy(Bank) button. Move the arrow button to "Tone" and enter it into 1 of the 4 Digital Part buttons that will be flashing. Once entered the sound will be played on the keyboard when that Digital Part button is selected..but remember to "write" it to the program and save it to a Bank destination.

[bodiddly2015]

Synth GUru I made a post how to do this...anyway
See the manual page 7. Heres How.
You first format the USB stick in the JD-XA, then put the files(.SVD) you downloaded ..& want to import into the "Import" folder of the USB stick. Insert the stick in the JD-XA, Hold the SHift and hit Copy(Bank) button. Move the arrow button to "Tone" and enter it into 1 of the 4 Digital Part buttons that will be flashing. Once entered the sound will be played on the keyboard when that Digital Part button is selected..but remember to "write" it to the program and save it to a Bank destination.

Thanks for this. however, there are two .SVD files with the Integra free libraries. For example, the "INTEGRA-7_Euro_Attack_Synth" I downloaded has this folder structure:

Roland
Backup
I7_EAS.SVD (811 K)
SOUND
I7_EAS_E.SVD (41K)

Are we meant to import both of those or just one?

[Synth Guru]

Synth GUru I made a post how to do this...anyway
See the manual page 7. Heres How.
You first format the USB stick in the JD-XA, then put the files(.SVD) you downloaded ..& want to import into the "Import" folder of the USB stick. Insert the stick in the JD-XA, Hold the SHift and hit Copy(Bank) button. Move the arrow button to "Tone" and enter it into 1 of the 4 Digital Part buttons that will be flashing. Once entered the sound will be played on the keyboard when that Digital Part button is selected..but remember to "write" it to the program and save it to a Bank destination.

Thanks RayS that was very helpful. I downloaded the Synth Legends. I was able to see the main .SVD file and a 128 waveforms. I wasn't able to preview the sounds though but I could only hear the sounds after saving the digital part. Do you know how to preview them before saving them?

Thanks for this. however, there are two .SVD files with the Integra free libraries. For example, the "INTEGRA-7_Euro_Attack_Synth" I downloaded has this folder structure:

Roland
Backup
I7_EAS.SVD (811 K)
SOUND
I7_EAS_E.SVD (41K)

Hi Bodiddly: I only saved the Sound .SVD unto the USB. Afterwards, I also copied the Backup sound unto the flash drive and I did not notice that anything different happened to the sounds.

[Redrain]

Hi

I think There is a little confusion here, jdxa can't load waveform....but only tones (that utilize the internal waveform of the jdxa). The internal waveform can't be modified or added.