NOTICABLE HUM ON USB

Forum for Roland FA-06/08
Post Reply
bellarph
Posts: 2
Joined: 09:32, 17 August 2015

NOTICABLE HUM ON USB

Post by bellarph »

Hi, new owner of FA 08, everything works fine, but if I put the USB cable inside the port only for midi (not for
Soundcard reason) i get a noticeable hum on the main out, (which are really quiet before) I tried different cables, but get the same result. At the moment of connection the noise floor increases dramatically.
Any Ideas?Thx Joe
Willem H
Posts: 32
Joined: 22:39, 24 January 2014

Re: NOTICABLE HUM ON USB

Post by Willem H »

Hi Joe ,

I had the same problem , changed USB cable several times but no success.
Then I changed the audio/line cables , with success .
Humming noise in your setup get drive you mad , believe me , I know .

This may be your solution , it was mine .....

Regards Willem
UltimateOutsider
Posts: 13
Joined: 19:38, 28 May 2015

Re: NOTICABLE HUM ON USB

Post by UltimateOutsider »

bellarph wrote:Hi, new owner of FA 08, everything works fine, but if I put the USB cable inside the port only for midi (not for
Soundcard reason) i get a noticeable hum on the main out, (which are really quiet before) I tried different cables, but get the same result. At the moment of connection the noise floor increases dramatically.
Any Ideas?Thx Joe
USB instruments have a fantastic ability to reveal ground loop issues in the studio. There are lots of little things that sometimes alleviate the symptoms (better shielded audio and/or USB cables, sometimes even changing CPU settings in BIOS), but the root cause is a ground loop.

Unfortunately there is no silver bullet for fixing these things, because everyone's setup is different. Do some searches on "usb ground loop" and "studio ground loop" and you should find some lists of things to try.
Post Reply