Page 1 of 1
Can I find every tones from JV80 series boards in I-7?
Posted: 17:39, 11 April 2016
by eclipse0119
Hi there.
So far I know that I can find every tones from the 12 SRX boards series in the I-7.
How about the JV-80 boards series?
(I've owned a FA-08 which is nice, but lack so many tones from the flagship I-7...sad )
Re: Can I find every tones from JV80 series boards in I-7?
Posted: 13:54, 27 April 2016
by jengelbr
The short answer is yes, some of them. Many SR-JV80 patches were brought into the SRX series boards, others were "improved" (YMMV). Best way to know which ones is to search for the SR-JV patch names in the SRX manuals, the names are often the same or similar (e.g. appending them with "SRX"). Keep in mind they will likely sound different since the Integra does not carry over the chorus and reverb settings from legacy PCM patches. Depending on the patch it can make a big difference, but you can always recreate those setting if you know them or are a reasonably good patch programmer...
Re: Can I find every tones from JV80 series boards in I-7?
Posted: 15:49, 22 May 2016
by Darksheer
You can check on my earlier post
viewtopic.php?f=54&t=45639#p283793 which SR-JV80 waves were included in the SRX boards. But the SRX boards do not contain the original SR-JV80 patches, only the wave samples.
In the XV series, if you have the SRX board, you can load the old original SR-JV80 patches. This is not possible in the I7.
Edit: And some SR-JV80 cards were never re-released as SRX, see
viewtopic.php?f=54&t=47874#p283795.