New Fantom, broken pitch bend

MrPillow · Post by **MrPillow** » 03:15, 21 August 2007

I just received my X8 and the pitch bender mod lever does nothing =\

Should I send it in for repairs or am I just missing and obvious setting on the board that turns these off?

Post by **V-CeeOh** » 11:45, 21 August 2007

Hi MrPillow and Welcome to the Clan

If you got a brand new X8, the bender should be working right away. If you got a used one, do a Factory Reset and check it again. If it still doesn't work, you should contact your dealer and manage to repair it, under warranty or not depending on your case or ask for a new X .

vishal · Post by **vishal** » 17:46, 22 August 2007

V-CeeOh is right

You must certainly replace or contact ur dealer because it was pitch bend u notice god knows if there might be internal defect which you might notice after 6 or may be 8 months when u get used to x8 .
If I would have been in ur place I would try all the measures to replace the board , I would never take such a risk .. what do u think , am I right?

djchris · Post by **djchris** » 20:04, 22 August 2007

I would do a factory reset first, and insure that your overall settings at correct for controllers.

MrPillow · Post by **MrPillow** » 04:33, 24 August 2007

The next day after I got it the screen crashed as well. I have sent it back for a replacement!

tboyreal · Post by **tboyreal** » 10:41, 24 August 2007

sounds like you got the one that the rats on the ship from japan got into and chewed up the wiring you didnt notice a cheese odor coming from your x8 did you. only kidding I hope all is well and you get your replacement soon.

Roland Clan Forums