Roland Clan Forums

I don't have a Roland JV-880. Tip 1. Set System / MIDI / Rx Switch / Control Change parameter to ON. This parameter determines whether or not the JV-880 responds to Control Change messages other than modulation, volume, Bank Select and RPN from and external MIDI device." Tip 2. In the given Per...

For testing, I have produced these SysEx messages for you. I don't have a JV-1010, so you'll have to try it yourself. If you use Windows, I recommend Bome Send SX. User Performance 01, Part 01 Off: F0 41 10 6A 12 10 00 10 00 00 60 F7 User Performance 01, Part 02 Off: F0 41 10 6A 12 10 00 11 00 00 5F...

"is there a 16MB card by now?": there is no such thing. The original Roland SR-JV80 cards have a maximum of 8MB of physical memory, and the Romulator cards simulate this. The 01..19 cards have four 2 MB mask ROM chips. The 97..99 cards have one 2 MB mask ROM chip. Note: on these cards Rola...

I don't have a Roland JD-990 either.
I don't know exactly what you want, but I've uploaded some .SYX files to the link below:
https://drive.google.com/drive/folders/ ... RDpviIIzCs

Tip 1. The problem may be caused by the MUTE GROUP parameter for hi-hat tones not being OFF. To test this, set the MUTE GROUP parameter for hi-hat tones to OFF. Tip 2. What is the firmware version? You can check it by holding [EDIT] & [COMPARE] while powering the device. If it shows v1.00, you m...

Firmware updates for Edirol by Roland PCR-300/PCR-500/PCR-800 can only be done via USB and only on a computer with the Roland driver installed.
https://drive.google.com/drive/folders/ ... 7dHSpFm5A1

Roland VK-8/VK-8M SoundSide alternative settings: 1. On Click Level: 15 (=50%). 2. Rotary & EQ: Rotary Woofer Level 127 (7FH) Rotary Tweeter Level 127 (7FH) Rotary Woofer Rise Time 64 (40H) Rotary Tweeter Rise Time 92 (5CH) Rotary Woofer Fall Time 61 (3DH) Rotary Tweeter Fall Time 95 (5FH) Rotar...

See the document "Roland SN-U110, Using Card's Tones" at the following link:
https://drive.google.com/drive/folders/ ... kW0RwpNvxK

"Roland Edirol PCR-300 firmware update I see that there's a firmware update available on the site and wonder if that'll do the trick. Proceed to follow Roland's instructions. Process doesn't complete, keyboard doesn't work anymore. Did I brick this? Well actually no, tried doing the update agai...

Unfortunately I do not have the firmware.

Case 1. XP-60 use FLASH ROM in the early lots (S/N from Z**0100 to Z**1099). These following that, how to update FLASH ROM. Required item: two 2HD FDs for update of XP-60. XP-60 Ver. UP DISK SET (PNO. 17048904). Method: 1.1. Load DISK 1 into the disk drive. 1.2. Power on. 1.3. LCD Backlight on, and ...

I have uploaded some stuff about the Roland XV-3080 on the following link: https://drive.google.com/drive/folders/1Di8QipfWDluBZlN6c9_fzUQnfpfp6Cye "IDENTIFYING THE VERSION NUMBER Step 1. Turn on the XV-3080 power. Step 2. While holding down [EXIT], press [<-] to enter the DEMO mode. Step 3. Pr...

Step 1: "Hold down the [A. PIANO] button while turning the power on. The RD-64 will operate as a MIDI controller keyboard with the same functionality as the Roland A-88. In Controller mode, no sound is produced from the RD-64’s internal sound generator. Also, nothing will happen when you press ...

I don't know much about the Roland D-70 either. General good advice: if you don't have to, don't disassemble the D-70, because you might ruin it.