Roland Clan Forums

I reinstalled version 2.00. That worked fine. Redownloaded 2.50 and installed it again. Worked!!! Thanks for your help.

Yes, that is exactly what I did. I have done it many times before without any problem.

Just updated to 2.50. After the normal boot sequence, the screen goes black and the keypad on the right has a circular pattern of light in the outside row. The power switch won't turn it off. I redownloaded the update, put it on a different USB drive and tried again. Same thing. How do I fix this?

Thank you for trying to help me FMG but this old organ grinder gets easily confused.

Can anyone tell me how to connect the two, I have the MIDI cable but I haven't a clue about how to set it up.

SOLVED! I was in Zone View and not Zone Edit. The Roland tutorial didn't mention going into Menu and choosing Tone Edit, it goes straight from Tone View to the Parameter screen!!!

I used to play a Steinway Grand fifty years go but never through a Leslie speaker.

The MFX Control button is not available on my Fantom 7. The entire menu is missing!

Zone 1 selected. A piano is there. Press ORGAN and 0309:Lord Organ 1 appears. Press PARAM key under EFFECTS and a window saying MFX shows 07:Enhancer. Rotating the jog wheel counterclockwise the end is reached showing 00: Thru. Rotating it clockwise I get to the end that shows 90:Script 100. Pressi...

I have updated to 2.0 firmware and have been trying to set up a rotary speaker effect on an organ. I have been trying to follow Ed Diaz's instructions on YouTube but when I bring up the Effects Parameters menu to change the MFX, there is no menu in the left column. It is blank. Has something changed...

zombietactics wrote:

dobrojoe wrote: ...First, I tried MIDI audio. No matter what settings I used, the sound was distorted so I reverted to a micing up my (Peavey) keyboard amp.

There is no such thing a "MIDI Audio". Whatever you're doing, it's not that.

No, I meant USB audio ;?)

I've been trying to record a piano performance into Logic Pro without much success. First, I tried MIDI audio. No matter what settings I used, the sound was distorted so I reverted to a micing up my (Peavey) keyboard amp. I have noticed it before but when I go higher up the treble end, the sound los...

Problem solved. I wasn't letting the Board 1 update complete before changing over the USB drive. There is a sort of ASCII progress bar at the top which has to run all the way to the right. Not very obvious but the cold light of day and all that!

Problem solved. I wasn't letting the Board 1 update complete before changing over the USB drive. There is a sort of ASCII progress bar at the top which has to run all the way to the right. Not very obvious but the cold light of day and all that!

When it boots up, I get an error message 'Program Version Error' on the screen and the Fantom is completely unresponsive otherwise, I can't even switch off without pulling the plug. I've tried twice with different downloads and USB sricks. Followed the update instructions to the letter. I can't even...