sample under a key

Forum for the Fantom-0 workstation/synthesizer
Post Reply
Robin1965a
Posts: 76
Joined: 06:37, 20 June 2020

sample under a key

Post by Robin1965a »

Hello,
If I have a sample from 1 minute and I want to put that sample under a key, I want to here the entire sample by pressing that key once. But I can only do that if I hold the key down. Does anyone have a solution for this?
Thanx!
xp30
Posts: 403
Joined: 21:10, 25 May 2022

Re: sample under a key

Post by xp30 »

Robin1965a wrote: 16:21, 7 March 2024 If I have a sample from 1 minute and I want to put that sample under a key, I want to here the entire sample by pressing that key once. But I can only do that if I hold the key down. Does anyone have a solution for this?
Try changing Envelope Mode to NO-SUS, and then increasing the AMP ENV parameters T2 and T3, so that the sample sounds for more than 1 minute, however, not much longer than 1 minute.
Robin1965a
Posts: 76
Joined: 06:37, 20 June 2020

Re: sample under a key

Post by Robin1965a »

Thanks!! I will try.
MINDKeys
Posts: 82
Joined: 12:18, 18 January 2008
Location: Lisboa, Portugal

Re: sample under a key

Post by MINDKeys »

Just use the gate on the sample side.
Also, maybe you know, although you can't assign it to a specific key you can go around that by transposing the Zone where you have the Sample Player.
Robin1965a
Posts: 76
Joined: 06:37, 20 June 2020

Re: sample under a key

Post by Robin1965a »

Thanx!!
MINDKeys
Posts: 82
Joined: 12:18, 18 January 2008
Location: Lisboa, Portugal

Re: sample under a key

Post by MINDKeys »

And if you use the Gate off to keep the sample playing and you need to stop it for some reason press Hold button 4 times quickly.
Post Reply