Recently I am useing Fantom x6, but when I changed from one sound to another by pressing the favourite bank the first sound is totally off , so it is very difficult to me in live performance ,
HELP !
sound change problem in Fantom x6
Re: sound change problem in Fantom x6
Hi abani,
The simple fix: Menu>System>Sound>Patch Remain = ON.
The better, but more complex fix is here.
Cheers
Andy
The simple fix: Menu>System>Sound>Patch Remain = ON.
The better, but more complex fix is here.
Cheers
Andy
Re: sound change problem in Fantom x6
A 'simple' (in some ways) version of Andy's complex fix can be found here but it requires that you add a Windows based Netbook (or possibly a tablet) to your live setup.
Re: sound change problem in Fantom x6
thanks Andy !
I got your reply but I am having another problem i.e while in performance mode (Live setting play) when changing the parts the previous parts sound is totally off , so it is very difficult to me in live performance . As per your advice this problem in patch mode have been solved by Patch remain "ON" but what to do in performance mode . Please Help !
Abani .
I got your reply but I am having another problem i.e while in performance mode (Live setting play) when changing the parts the previous parts sound is totally off , so it is very difficult to me in live performance . As per your advice this problem in patch mode have been solved by Patch remain "ON" but what to do in performance mode . Please Help !
Abani .
Re: sound change problem in Fantom x6
Hi Abani,
That's down to the difference between Patch & Performance mode, I'm afriad.
To do what you want in Performance mode you need to use RPS (the thread link I gave you earlier) or the Live Commander software linked to by Arjan.
Basically, you need to switch sounds within the Performance, rather than switch between saved Performances.
For example, say your Performance as saved is set like this:
Part 1 Piano ON
Part 2 Bass ON
Part 3 Strings OFF
Part 4 Choir OFF
Part 5 Synth Lead OFF
You would create RPS phrases to change these settings, so with one push of a pad you would change from the above to, say:
Part 1 Piano ON
Part 2 Bass OFF
Part 3 Strings ON
Part 4 Choir ON
Part 5 Synth Lead OFF
and so on...
Hope this helps.
Andy
That's down to the difference between Patch & Performance mode, I'm afriad.
To do what you want in Performance mode you need to use RPS (the thread link I gave you earlier) or the Live Commander software linked to by Arjan.
Basically, you need to switch sounds within the Performance, rather than switch between saved Performances.
For example, say your Performance as saved is set like this:
Part 1 Piano ON
Part 2 Bass ON
Part 3 Strings OFF
Part 4 Choir OFF
Part 5 Synth Lead OFF
You would create RPS phrases to change these settings, so with one push of a pad you would change from the above to, say:
Part 1 Piano ON
Part 2 Bass OFF
Part 3 Strings ON
Part 4 Choir ON
Part 5 Synth Lead OFF
and so on...
Hope this helps.
Andy