Roland Clan Forums

I discovered the problem. I had inadvertently changed the switch on my Hold pedal from "press to hold" to "press to release". Until I pressed the pedal for the 1st time after power up the DS61 worked as expected without a pedal. However, as soon as I pressed the pedal the 1st tim...

I have had two situations during live performances where my Juno DS-61 suddenly behaves as though every note I play never releases. In one situation I actually quickly power reset the keyboard mid-song, and in another situation I pulled the sustain pedal out of the HOLD port in the back. In both cas...

It's back to GENERIC and working. May have been my knock-off Apple Camera Connection. Thanks!

I have been successfully communicating from my Juno DS-61 via a USB/Camera connection to an iPad running both OnSong (to send the appropriate configuration messages to the Juno on a song by song basis) and MIDI Wrench (to capture MIDI messages both to and from the Juno). All of a sudden, my Juno MID...

OK, I think I've got it. The attached list of SYSEX commands allow all the parameters of the ARP to be enabled / disabled and configured. What was throwing me was that the ARP indicator light on the Juno DS-61 doesn't turn on even though you've enabled it with MIDI. So I'm (1) enabling/configuring t...

How is it that the SYSEX command below works for both switching to PERFORMANCE or PATCH (I am successfully using it right now on my DS61) when the checksum value should actually change based on the value of <MODE>? These are numbered 0 through 4, i.e.: PATCH=00 PERFORM=01 GM1=02 GM2=03 GS=04 In the ...

I believe I've read every post about this topic but haven't yet found an answer to the question, "has anyone successfully used a MIDI SYSEX command to enable / disable the ARP function?" If so, please share the hex string (F0 41 10 00 00 3A......) including checksum calculation. Thanks in ...